
Airbrush Cleaning & Air-Path Kit
The parts either side of the airbrush: what you clean it with, what keeps water and pressure spikes out of the paint, and what holds it when you put it down. 56 products from the shops we track, priced per market.
The three things worth owning first
A cleaning pot. It catches the mist and the solvent smell that otherwise hang in the room, and gives the brush somewhere to rest between colours. It matters more than it looks like it should - see how to clean an airbrush for the routine it belongs to.
A moisture trap. Compressed air condenses water, and water reaching the nozzle spits on the model - the fault most often blamed on paint. An in-line trap between compressor and hose is the cheapest fix in airbrushing, and some compressors ship with one already.
Somewhere to put the brush down. A loaded airbrush laid on the desk leaks into the cup seal and rolls into things. A holder or a clamp costs less than one replacement nozzle.
Cleaning Pots, Kits & Brushes
What the paint comes out with: pots to spray into, the passage brushes and nozzle tools for a strip-down, wash bottles, and the lubricant for putting it back together.








Harder & Steenbeck
airbrush cleaning brushes

Harder & Steenbeck
airbrush cleaning brushes

Harder & Steenbeck
maintenance tool


Green Stuff World
airbrush cleaning brushes

Green Stuff World
nozzle cleaning



Green Stuff World
cleaning set

Green Stuff World
strains paint into the cup

Green Stuff World
flushing the airbrush

Green Stuff World
flushing the airbrush

Gaahleri
cleaning pot and wash station with built-in holder · pot, cleaning needle, five brushes, three cotton filters, holder


Sparmax
700ml spray-out pot with a built-in airbrush holder
Moisture Traps & the Air Path
Everything between the compressor and the brush - traps to catch condensation, regulators and gauges to hold a pressure, hoses, quick-release couplers and thread adaptors.

Iwata
moisture trap, regulator and gauge




Harder & Steenbeck
siphon feed adaptor

Green Stuff World
airbrush hose

Green Stuff World
hose with moisture trap

Green Stuff World
moisture trap

Green Stuff World
air pressure regulator


Green Stuff World
quick disconnect with air control

Green Stuff World
thread adaptor

Green Stuff World
pressure gauge



Sparmax
in-line air control with bleed valve




Gaahleri
four-port airbrush stand and air manifold · independent pressure control on each port


Iwata
10ft (3m) braided airbrush hose, 1/8in BSP airbrush end to 1/4in BSP compressor end

Sparmax
10ft (3m) 48-knit braided hose, 1/8in BSP at both ends
Holders, Stands & Clips
Somewhere to rest a loaded airbrush, and somewhere to hold the model while you spray it.



Green Stuff World
holds clipped miniatures while spraying

Green Stuff World
holds clipped miniatures while spraying

Green Stuff World
holding miniatures for spraying





Sparmax
Tabletop clamp holder for up to two airbrushes
And spray booths?
We hold exactly one - Green Stuff World's own airbrush spray booth - and one product is not a shelf, so there is no booth comparison here yet rather than a page pretending to be one. Extraction is still worth having: a booth pulls the overspray away from your face and out of the room, and it is the honest answer to whether airbrushing indoors is safe. A proper respirator matters more than a booth does, and neither is something we can compare on one listing.
The machines that feed all of this: airbrush compressors compared and the compressor buying guide. Every brand's full range sits in the airbrush section.