How to Paint Necromunda Noble Houses

Rich purple and gold finery, kept spotless above the sump

Recommended recipe

How the scheme reads on a model

Armour — base to highlight

Base coat
Shade
Layer
Highlight
Edge highlight

Additional details

Trim
Weapons
Leather
Skin
Lenses
Basing
Cloth of gold
House heraldry white
1

Base coat

Lay the foundation colour down over primer, slightly darker than the final tone.

3

Layer

Rebuild the main colour on the raised areas, leaving the shade in the cracks.

4

Highlight

Pick out the upper edges and surfaces that catch the light.

5

Edge highlight

Sharpen only the sharpest edges for a crisp, finished look.

Details & accent colours

Everything else on the model - metals, skin, leather, lenses, basing and this faction's signature accents.

Metal — trim

Aquilas, rims and ornament. Basecoat gold, wash with a brown shade, then edge a brighter gold.

Leather & pouches

Straps, holsters and bare wood. Mid brown, shaded, then drybrushed a lighter tan.

Skin & flesh

Faces and hands. Basecoat, a flesh wash into the recesses, then build the highlights back up.

Eyes & lenses

Lenses, eyes and energy. A bright spot colour that pops against the armour - dot it on and add a white glint.

Basing — earth

Groundwork. Earth basecoat, drybrushed bone, finished with your choice of grass, sand or snow.

Cloth of gold

Robes and trim woven through with gold thread - glaze yellow over gold metal rather than painting flat yellow, so it stays fabric.

House heraldry white

Crisp white panels and sashes carry each Clan House’s device. It is the only clean cloth in Necromunda; keep it that way.

Buy It as a Box

Paint sets that cover this recipe - a set is usually cheaper than buying pots one by one.

Covers 10 of 13 paints in this scheme (77%) — base coat, layer, highlight, edge highlight and more.

Browse all paint sets →

Your paints

Tick off what's already on your shelf — whatever's left is your shopping list.

13 paints in this scheme

Price this recipe

13 paints

totals excl. delivery · affiliate links

  • Clear Purple

    Reaper

    No price tracked yet
  • Inktense Violet

    Scale75

    £3.60at Model Workshop · eBay· priced 28 Aug
  • Purple Hex

    Vallejo

    No price tracked yet
  • Warlock Magenta

    Army Painter

    £2.88at Wayland Games· priced 28 Aug
  • Lucius Lilac

    Citadel (Warhammer Paints)

    £2.34at Wayland Games· priced 28 Aug
  • Ki-Rin Gold

    Army Painter

    No price tracked yet
  • Iron Wolf

    Army Painter

    No price tracked yet
  • Owlbear Brown

    Army Painter

    No price tracked yet
  • Quartz Skin

    Army Painter

    £2.88at Wayland Games· priced 28 Aug
  • Leafy Green

    Army Painter

    £2.88at Wayland Games· priced 28 Aug
  • Graveyard Earth

    Citadel (Warhammer Paints)

    No price tracked yet
  • Buff

    Vallejo

    £2.36at Wayland Games· priced 28 Aug
  • Brainmatter Beige

    Army Painter

    £2.88at Wayland Games· priced 28 Aug

Every Noble Houses kit and box, priced

Prices compared across the shops that stock them — boxes ranked by cost per model.

The Clan Houses of the spire are the only models in Necromunda you are allowed to paint clean. Everything else in the setting is rusted, patched or bloodstained; the nobles are silk, gold thread and polished trim, and they look wrong the moment you weather them. That makes them a nice change of pace and a genuine test - there is nowhere for a sloppy basecoat to hide behind grime.

They are also a small commitment. Most of these are single characters and retinues, so this is a scheme to slow down for rather than batch.

The signature look

Deep imperial purple as the dominant robe colour, gold at every edge and fitting, crisp white panels carrying house heraldry, and pale skin that has never seen the underhive. Keep the value range wide: a dark purple, a bright gold and a near-white in the same eyeline is what makes the models read as expensive. Grime, if you use it at all, belongs on the hem and the boots and nowhere else.

The purple robes

  1. Basecoat Naggaroth Night, two thin coats. For a warmer, more regal purple use Phoenician Purple instead - it sits closer to true imperial purple and is a stronger base under gold.
  2. Shade with Druchii Violet into the folds. Keep it in the creases; a wash over the whole robe kills the richness.
  3. Layer Xereus Purple across the raised cloth.
  4. Highlight Genestealer Purple along the top of each fold, thinner as you go up the model.

The fast route: undercoat Wraithbone, then a single coat of Shyish Purple contrast for a cold, blue-leaning purple, or Magos Purple for a warmer pink-leaning one. Both look genuinely good on robes because the fabric folds do the shading for you. A tidy Genestealer Purple highlight afterwards takes it the rest of the way.

Vallejo Royal Purple or Imperial Purple and Army Painter Royal Purple are close equivalents for the base.

Gold trim and cloth of gold

There are two golds on these models and treating them the same is the commonest mistake.

Hard gold - trim, fittings, jewellery, weapon furniture:

  1. Basecoat Retributor Armour.
  2. Shade Reikland Fleshshade for a warm, glowing gold, or Agrax Earthshade for an older, heavier one.
  3. Layer Auric Armour Gold on the raised metal.
  4. Point-highlight Liberator Gold, then a tiny catch of Stormhost Silver on the sharpest corners only.

Cloth of gold - robes and sashes woven through with gold thread. Basecoat Retributor Armour, then glaze thinned Casandora Yellow over it rather than painting flat yellow. The metallic underneath keeps a fabric sheen instead of a mirror finish, and it stays clearly different from the hard trim beside it.

Vallejo Old Gold into Polished Gold, or Army Painter Greedy Gold into Bright Gold, do the same job.

White heraldry and pale skin

House devices sit on white panels and sashes, and they are the only clean cloth in the game. Basecoat Grey Seer, shade the folds with thinned Apothecary White, then bring the raised cloth up to White Scar. Do not wash white with a brown or black shade - it turns it into old bone, which is the exact opposite of the point.

Skin: Kislev Flesh basecoat, Reikland Fleshshade in the creases, layer back with Kislev Flesh, then Flayed One Flesh on the brow, nose and cheekbones. Spire-born nobles are pale and slightly waxy; keep the flesh light and the shading gentle.

Hair and furs take Rhinox Hide shaded Agrax Earthshade and drybrushed Stormvermin Fur, or Zandri Dust into Ushabti Bone for the blonds.

Tips and common mistakes

  • Thin the purple properly. Purple is a poor coverer and a thick coat leaves visible brush marks on a smooth robe, where there is no texture to hide them.
  • Two golds, not one. If the sash and the buckle beside it are the same finish, the model looks like painted plastic rather than metal and cloth.
  • Keep the white cold. A grey-white next to a warm gold is far more convincing than a cream one.
  • Restrict the dirt. A little Steel Legion Drab dragged onto the hem and boot soles says they walked here. Anything more and they stop being nobles.
  • Spend the time on faces. These are character models seen at arm's length. A face that took an hour is visible; a robe that took three is not.

When you are happy with the palette, open this scheme in the generator to swap brands or shift the purple warmer for a different Clan House.

Recipes are generated by perceptual colour matching against our cross-brand paint database. Use them as a strong starting point and test paints in person when precision matters.